WiFi Extender
HomeShop
EZR14T
EZR14T
  • Outdoor WiFi5 Extender
  • 📗Manual
    • Hardware
      • Package Contents
      • Interface Overview
      • Install Antennas
    • PoE Power
    • Mounting
    • Firmware
      • Login & Admin
      • WiFi Hotspots
      • WiFi Relay
      • LAN and WAN
      • Update
      • Recovery
  • 🧭Links
    • OutdoorRouter Store
    • Knowledge Base
Powered by GitBook
On this page
  • Power On Extender
  • Connection
  1. Manual

Firmware

This outdoor WiFi extender runs on open-source firmware that provides robust functionality for network management.

Power On Extender

After successfully connecting the PoE & WAN port on the extender to the PoE port on the PoE injector, connect the AC plug on the PoE injector to the 110~240 Volt electrical outlet, and the extender will boot up automatically. It takes 3~4 minutes to boot up completely.

Connection

Use a phone or computer to join the open WiFi hotspot Extender-WiFi-xxxx or connect the computer to the LAN port on the motherboard of the WiFi extender.

The -V4 WiFi hotspot is on 2.4GHz, and the -V5 hotspot is on 5.8GHz.

Last updated 1 year ago

📗