Hardware
Last updated
Last updated
Get robust, long-range WiFi wherever you need it – this powerful MIMO extender is built to provide maximum coverage to any outdoor environment.
This rugged, IP67-rated WiFi extender delivers seamless internet coverage across outdoor residential, commercial, and industrial settings. With high-gain omnidirectional antennas broadcasting dual 2.4GHz and 5.8GHz MIMO signals, it provides up to 1200Mbps speeds and blankets up to 100-260 meters with reliable, long-range wireless coverage. The waterproof enclosure ensures flawless performance in any weather, making it ideal for extending connectivity to outdoor areas.
Note: 1. DC power supply is not included. 2. Do not input overloaded power, especially the electric current! 3. The typical DC power sources are 12V 1.5~2.0A or 48~52V 0.5A.
CPU Chipset:
MTK7621AT MIPS1004Kec
Clock Speed:
880MHz
Memory:
DDR3 256Mbyte / SPI FLASH 16MB
Indicator:
System / WiFi / Power / Internet
Consumption:
≤ 25 Watt
Temperature:
Working: -30 to +70°C / Storage: -40 to +85°C
Humidity:
0%~100% RH
Physical Interface:
1x PoE & LAN and 1x PoE & WAN 1x Reset button
Frequency:
2.4GHz: 2412~2472 MHz
5.8GHz: 5180~5825MHz
Wi-Fi Channel:
1~13
149, 153, 157, 161, 165
Speed Rate:
300Mbps
867Mbps
Output Power:
27 ± 2.0 dBm
24 ± 2.0 dBm
Sensitivity:
≤ -64 ~ -91 dBm
≤ -55 ~ -82 dBm
Wi-Fi Standard:
IEEE 802.11 a/b/p/g/n
IEEE 802.11ac wave2
Modulation:
OFDM / BSDK / QPSK / DQPSK / DBPSK
MIMO WiFi:
2T2R Wave 2.0 MU-MIMO
2 x Wi-Fi Antenna:
2400~2500 / 5150~5850 MHz Gain: 5 dBi / V.S.W.R.: ≤ 1.92 / >65% Efficiency
Connector:
N Male
Measurement:
Ø 20 mm / Length 200 mm
Material:
Fiberglass pipe and PCBA feed
Polarization:
Linear Polarization
Impedance:
50 Ω
Input:
AC 100~240Volt 50/60Hz
Output:
52Volt 0.5Amps
LAN Cable
CAT6 outdoor 10-meter cable included * Support max 50-meter length.
PoE Wiring:
TIA/EIA568B Standard DC+ 4,5 | DC- 7,8 | 1Gbps Ethernet on all wires
AC Plug:
EU / GB / US / AU standard available * Ship depends on the destination.