Firmware

This outdoor WiFi extender runs on open-source firmware that provides robust functionality for network management.

Power On Extender

After successfully connecting the PoE & WAN port on the extender to the PoE port on the PoE injector, connect the AC plug on the PoE injector to the 110~240 Volt electrical outlet, and the extender will boot up automatically. It takes 3~4 minutes to boot up completely.

Connection

Use a phone or computer to join the open WiFi hotspot Extender-WiFi-xxxx or connect the computer to the LAN port on the motherboard of the WiFi extender.

The -V4 WiFi hotspot is on 2.4GHz, and the -V5 hotspot is on 5.8GHz.